Glaze 'N Seal - sealers for concrete, masonry, tile and stone.
Wet Look 2000 Lacquer (Wet Look, Solvent Based)
Multi-Purpose Sealer (Medium Gloss, Water Based)
Natural Look Penetrating Sealer (Natural Look, Water Based)
Slate Sealer (Low Gloss, Water Based)
- Helpful Tips offered by Glaze 'N Seal:
1. Begin with a clean, dry* porous surface.
2. Read product package directions carefully.
3. Do a test application and evaluate before proceeding with a large project.
4. For coating type sealer - apply thin even, multiple coats.
For penetrating type sealer - apply liberal coating.
5. Do not allow sealer to puddle on surface (brush out before they dry).
6. Allow sealer to cure before exposure to water, heavy traffic & contaminants.7. Reseal as necessary.
Miaco Chemical Products Corp.
Slate-Brite Sealer - High performance acrylic lacquer coating ideal for use on most of masonry, bluestone, slate & concrete. This sealer b/c of its unique resin type, affords excellent adhesion, UV resistance & water repellency. It is colorless when dry and can be used both interior & exterior.
Sold in 1 & 5 Gallon containers.
Apply to clean, dry surfaces, free of grease, oil and other foreign materials.
Material can be brushed, rolled or sprayed on.
Do not apply if temperature is above 90 F or under 40 F.
511 Impregnator - Penetrating sealer for tile, marble & grout. Water, stain and slip protection.
511-H2O - Water based penetrating sealer. Water, stain and slip protection for tile, marble & grout.
Professional
Water Sealant - Contains silicone rubber. Penetrating, Durable, Transparent, Bridges Hairline Cracks, Breathable & Waterproofs in One Coat. Available in 3 formulations.
Regular Strength - Recommended for brick, concrete, granite & terra cotta.
Extra Strength - Recommended for seasoned wood, smooth masonry block, very porous concrete & brick, sandstone, limestone, stucco & adobe.
Super Strength - Recommended for split face, fluted, smooth masonry block.
Unilock
Joint Sand Stabilizer & Paver Sealer - Seals pavers & bonds joint sand.
Hydrozo Products
Enviroseal 7 - is a clear, water-based silane/siloxane sealer for protecting a wide variety of vertical surfaces. It provides a cost-effective solution for protecting substrates from water and the elements.
*Test to make sure that the product is dry before applying any sealers to it. A good way to test this is by placing plastic on top of the product to see if there is any water evaporation. Sometimes the product may appear to be dry on the surface but below there might be water still trapped underneath.